Vertical Cylinder Precision Boring Machine
VCB-1000
VCB-1200
VCBM-1200
|
VCB-1200 & Accessories |
 |
 |
Highlights :
-
Base, Cross Slide, Table, Column and Boring head (gear box) are of fine-grained, graded alloy casting. Stress relief after rough machining ensures rugged and vibration free operation of the machine.
-
Boring head setting with tappered gibs to avoid vibration and achieve better boring accuracy.
-
Auto stop of spindle rotation and rapid return of boring head after completion of the boring application.
-
Anti-friction wear resistant liners provided on all sliding surfaces of the boring head to minimise wear and tear.
-
Engine block stud need not be removed while boring.
-
Tool setting micrometer can be fixed on the boring spindle to achieve accurate tool setting.
-
4 spindle speed and feed combination to achieve better surface finish and fast boring operation.
-
Spindle speed gears are hardened and ground.
-
Manual fine feed hand wheel for counter boring and chamfering located on the right hand side of the boring head for easy operation.
-
Forced lubrication system provided inside gear box.
-
Control box for various functions has been provided on the right hand side and at a comfortable position.
-
Can bore 'V' type cylinder blocks with universal fixture.
- Gear box sliding guideways are fully covered by bellows.
| Technical Specifications : | |
| Boring Capacity | 62 - 150mm (2.5" - 5.9") |
| Boring Capacity with extra spindle | 32 - 190mm (1.25" - 7.4") |
| Max. Boring Head travel | 650mm (25.5") |
| Spindle Speeds | 75, 150, 240, 480 rpm |
| Spindle Feeds | 0.05 ,0.08, 0.10, 0.15mm |
| Max. Distance from Spindle center to column | 360mm (14.17") |
| Working Table Size (L x W) | 1200 x 360 (47.2" x 14.17") |
| Table Traverse - Longitudinal | 850mm (33.5") |
| Table Traverse - Crosswise | 75mm (2.9") |
| Motor Spindle Drive | 1.2 / 1.5 HP,750 / 1500 rpm |
| Motor Rapid | 0.5 HP, 900rpm |
| Length of the Machine | 1900mm (74.8") |
| Height of the Machine | 2440mm (96") |
| Width of the Machine | 1200mm (47.2") |
| Work space required (L x W) | 2330mm x 1400mm (91.7" x 55") |
| Work height required | 2640mm (104") |
| Net Weight (Approx.) | 2500 Kg |
| Gross Weight (Approx.) | 3400 Kg |
| Shipping Volume | 8 m3 |
Standard Accessories :
| Setting up parallel - 100 | 1 pair |
| Setting up parallel - 200 | 1 pair |
| Boring tools (L-47, 67, 75, 95) | 4 Nos |
| Chamfering cum facing tools (L-60 & 90) | 2 Nos |
| Tool setting micrometer with bracket | 1 No |
| Table gib adjusting handle | 1 No |
| Allen key set (9 Nos) | 1 set |
| Double end spanner 24/26 | 1 No |
| T-bolt washer with nut | 12 Nos |
| Block tightening clamp | 4 Nos |
| Boring spindle dia - 60 | 1 No |
| Centering device for dia - 60 spindle | 1 No |
| Boring spindle dia - 85 | 1 No |
| Centering device for dia - 85 spindle | 1 No |
| Levelling plate | 3 Nos |
| Levelling bolt with nut (M16-50) | 3 Nos |
| Foundation bolt with nut | 3 Nos |
| Oil gun | 1 No |
| T handle allen key-4 mm | 1 No |
| T handle allen key-5 mm | 1 No |
Optional Accessories :
- Boring spindle dia - 30
- Boring spindle dia - 46
- Boring heads dia - 120 & dia - 140
- Deapth measuring device
- V type cylinder block clamping fixture
- Quick clamping device
